Specifications:

    The Rawhide Digital Dial in is a two piece unit (both pieces and cable included!) The control unit is placed near driver to control the display unit. The control unit is mounted to your dash or control panel by flanges on each side of the control unit. The only connections to the control unit are: ground, power, and remote cable to display.

    The display unit can be mounted inside the car's window with the Velcro strips or mounted behind your dragsters seat with the chassis mount now available. The only connection to the display unit is the control cable.

NEW! Small Dial-in Board  ABS Plastic 3 inch by 2 inch super bright numbers! Outside lip of board measures only 10 inches long by 5.5 inches tall Fits inside brackets 4 inches tall by 9 inches wide! Colors other than red by special order.

        Control Unit

• Size: 6 inch x 4 inches x 1 1/4 inches
• Material: ABS Plastic
• Power Required: 6 to 24 volts D.C.
• (will work with 6, 12  or 16 volt systems!)

    Control Cable:

• Length: 9.84 feet
• Diameter: .275 inch
• (polarity protected and can be extended!)

   Display Unit:

• Dimensions: 12 x 7 x 3/4 inches
• Material: ABS plastic

SUPER BRIGHT 4 INCH LED NUMBERS CAN EVEN BE SEEN IN SUNLIGHT!

web page by NZ5C
Last revised: May 02, 2006